Super Racing Parts

Everything on it works well. It includes a carbon fiber protective cover and Belkin case. Brand new battery. Full specs available here: http://support.apple.com/kb/SP8

The AR.Drone remote-control quadricopter is a groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. The AR.Drone is remote-controlled by an iPhone and features a number of sensors, including a front camera, vertical camera, and an ultrasound altimeter. The AR.Drone can also be used in video games, such as AR.FlyingAce, a dogfight between two AR.Drones. A groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality.

The AR.Drone remote-control quadricopter is a groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. The AR.Drone is remote-controlled by your device (see compatibility below) and features a number of sensors, including a front camera, vertical camera, and an ultrasound altimeter. The AR.Drone can also be used in video games, such as AR.FlyingAce, a dogfight between two AR.Drones. A groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. Click to enlarge. The First Quadricopter Controlled by iPod touch/iPhone/iPad/Android Devices Control with Your Device Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). The Parrot AR.Drone The AR.Drone is the first quadricopter that can be controlled by an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). High-technology Sensors Offer Simple Piloting A mix of captors, wide-angle camera, high-speed camera and MEMS (micro electro mechanical systems), accelerometer, gyro sensors, and ultrasound sensor combine with a powerful on-board computer to make piloting the AR.Drone easy. Simply use your device and just tilt and touch to control the AR.Drone. Connect and See The Parrot AR.Drone generates its own Wi-Fi network to which you connect your device to control. The front camera view is streamed to your piloting device display. Autopilot The AR.Drone autopilot allows easy takeoff and landing. After takeoff, autopilot stabilizes the AR.Drone at an 80-centimeter altitude. When you remove your finger from your device, the autopilot function automatically puts the AR.Drone into stationary flight. Lost connection with the AR.Drone? Autopilot takes over again and stabilizes the device before attempting a soft and safe landing. Indoor and Outdoor Hulls Included The full hull shield protects the AR.Drone from impacts that occur during wild battles against enemies hidden in the rooms of the house. The streamlined colored hull is aerodynamic, allowing greater control outside. High Durability and Easy Repair AR.Drone is a quadricopter made of carbon fiber and high-resistance PA66 plastic. All parts can be changed for easy repair. Free Piloting App Please download the free AR.Freeflight App (iTunes App Store or Android Market) to control the AR.Drone. Augmented Reality Games Not only see what the AR.Drone sees with the front-mounted camera, but enjoy a wide variety of games in augmented reality. AR.Games sold in the iTunes App Store and Android Market. Choose from a selection of single-player and multiplayer games, using the AR.Drone's camera and the augmented reality applications. Shoot enemies or other drones. Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod Touch, iPhone, iPad, or Android device. The full hull shield protects the AR.Drone from impacts. The Parrot AR.Drone has been designed for both inside and outside use. AR.Drone Details Compatibility Apple iOS devices: iPod touch, iPhone, and iPad Android OS devices: Optimized for: Samsung Galaxy S, Samsung Galaxy S II, Motorola Xoom, HTC Desire; Also compatible with: HTC Desire HD, HTC Sensation, LG Optimus 2x, and Sony Ericsson Xperia Play Battery Fly time: 12 minutes 3-cell lithium polymer battery Capacity: 1000 mAh Charge time: 90 minutes Motors 4 x 15 W electric brushless motors (3,500 rpm) Construction High-efficiency propellers Carbon tube structure Front camera VGA (640 x 480) CMOS camera 93-degree wide-angle lens 15 fps video Vertical camera QCIF (176 x 144) High-speed camera (CMOS) 64-degree diagonal lens 60 fps video Horizontal stabilization Altimeter Ultrasound-based Range: 6 m Emission frequency: 40 kHz Vertical stabilization Internal guidance system MEMS (micro electro mechanical system) 3-axis accelerometer 2-axis gyroscope 1-axis yaw precision gyroscope Embedded computer ARM9 RISC 32-bit 468 MHz 128 MB DDR RAM Wi-Fi b/g Linux OS USB socket Dimensions Size: 28 x 28 inches with hull; 29 x 11 inches without Weight: 13.4 ounces What's in the Box AR.Drone, indoor hull, outdoor hull (orange/blue), battery, charger, four adapters (EU, US/JP, UK, Aus/NZ), sticker for outdoor hull (for multiplayer battles), and quick start guide.

The AR.Drone remote-control quadricopter is a groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. The AR.Drone is remote-controlled by your device (see compatibility below) and features a number of sensors, including a front camera, vertical camera, and an ultrasound altimeter. The AR.Drone can also be used in video games, such as AR.FlyingAce, a dogfight between two AR.Drones. A groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. Click to enlarge. The First Quadricopter Controlled by iPod touch/iPhone/iPad/Android Devices Control with Your Apple Device Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). The Parrot AR.Drone The AR.Drone is the first quadricopter that can be controlled by an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). High-technology Sensors Offer Simple Piloting A mix of captors, wide-angle camera, high-speed camera and MEMS (micro electro mechanical systems), accelerometer, gyro sensors, and ultrasound sensor combine with a powerful on-board computer to make piloting the AR.Drone easy. Simply use your device and just tilt and touch to control the AR.Drone. Connect and See The Parrot AR.Drone generates its own Wi-Fi network to which you connect your device to control. The front camera view is streamed to your piloting device display. Autopilot The AR.Drone autopilot allows easy takeoff and landing. After takeoff, autopilot stabilizes the AR.Drone at an 80-centimeter altitude. When you remove your finger from your device, the autopilot function automatically puts the AR.Drone into stationary flight. Lost connection with the AR.Drone? Autopilot takes over again and stabilizes the device before attempting a soft and safe landing. Indoor and Outdoor Hulls Included The full hull shield protects the AR.Drone from impacts that occur during wild battles against enemies hidden in the rooms of the house. The streamlined colored hull is aerodynamic, allowing greater control outside. High Durability and Easy Repair AR.Drone is a quadricopter made of carbon fiber and high-resistance PA66 plastic. All parts can be changed for easy repair. Free Piloting App Please download the free AR.Freeflight App (iTunes App Store or Android Market) to control the AR.Drone. Augmented Reality Games Not only see what the AR.Drone sees with the front-mounted camera, but enjoy a wide variety of games in augmented reality. AR.Games sold in the iTunes App Store and Android Market. Choose from a selection of single-player and multiplayer games, using the AR.Drone's camera and the augmented reality applications. Shoot enemies or other drones. Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod Touch, iPhone, iPad, or Android device. The full hull shield protects the AR.Drone from impacts. The Parrot AR.Drone has been designed for both inside and outside use. AR.Drone Details Compatibility Apple iOS devices: iPod touch, iPhone, and iPad Android OS devices: Optimized for: Samsung Galaxy S, Samsung Galaxy S II, Motorola Xoom, HTC Desire; Also compatible with: HTC Desire HD, HTC Sensation, LG Optimus 2x, and Sony Ericsson Xperia Play Battery Fly time: 12 minutes 3-cell lithium polymer battery Capacity: 1000 mAh Charge time: 90 minutes Motors 4 x 15 W electric brushless motors (3,500 rpm) Construction High-efficiency propellers Carbon tube structure Front camera VGA (640 x 480) CMOS camera 93-degree wide-angle lens 15 fps video Vertical camera QCIF (176 x 144) High-speed camera (CMOS) 64-degree diagonal lens 60 fps video Horizontal stabilization Altimeter Ultrasound-based Range: 6 m Emission frequency: 40 kHz Vertical stabilization Internal guidance system MEMS (micro electro mechanical system) 3-axis accelerometer 2-axis gyroscope 1-axis yaw precision gyroscope Embedded computer ARM9 RISC 32-bit 468 MHz 128 MB DDR RAM Wi-Fi b/g Linux OS USB socket Dimensions Size: 28 x 28 inches with hull; 29 x 11 inches without Weight: 13.4 ounces What's in the Box AR.Drone, indoor hull, outdoor hull (orange/yellow), battery, charger, four adapters (EU, US/JP, UK, Aus/NZ), sticker for outdoor hull (for multiplayer battles), and quick start guide.

The AR.Drone remote-control quadricopter is a groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. The AR.Drone is remote-controlled by an iPhone and features a number of sensors, including a front camera, vertical camera, and an ultrasound altimeter. The AR.Drone can also be used in video games, such as AR.FlyingAce, a dogfight between two AR.Drones. Features Free Piloting App on iTunes - Download AR.Freeflight in the App Store to control the AR.Drone Augmented Reality Games - Additional AR.Games will be sold in the iTunes App StoreSpecificationsBattery Fly time - 12 minutes 3-cell lithium polymer battery Capacity - 1000 mAh Charge time - 90 minutesMotors 4 x 15 W electric brushless motors (3,500 rpm)Construction High-efficiency propellers Carbon tube structureFront camera VGA (640 x 480) CMOS camera 93-degree wide-angle lens 15 fps videoVertical camera QCIF (176 x 144) High-speed camera (CMOS) 64-degree diagonal lens 60 fps video Horizontal stabilizationAltimeter Ultrasound-based Range - 6 m Emission frequency - 40 kHz Vertical stabilizationInternal guidance system MEMS (micro electro mechanical system) 3-axis accelerometer 2-axis gyroscope 1-axis yaw precision gyroscopeEmbedded computer ARM9 RISC 32-bit 468 MHz 128 MB DDR RAM Wi-Fi b/g Linux OS USB socket Size - 28 x 28 inches with hull; 29 x 11 inches without Weight - 13.4 ounces

The AR.Drone remote-control quadricopter is a groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. The AR.Drone is remote-controlled by your device (see compatibility below) and features a number of sensors, including a front camera, vertical camera, and an ultrasound altimeter. The AR.Drone can also be used in video games, such as AR.FlyingAce, a dogfight between two AR.Drones. A groundbreaking device combining the best of many worlds, including modeling, video gaming, and augmented reality. Click to enlarge. The First Quadricopter Controlled by iPod touch/iPhone/iPad/Android Devices Control with Your Device Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). The Parrot AR.Drone The AR.Drone is the first quadricopter that can be controlled by an iPod touch, iPod touch, iPad, or Android device (OS 2.2 (Froyo) or higher, 3-inches wide minimum, and multi-touch). High-technology Sensors Offer Simple Piloting A mix of captors, wide-angle camera, high-speed camera and MEMS (micro electro mechanical systems), accelerometer, gyro sensors, and ultrasound sensor combine with a powerful on-board computer to make piloting the AR.Drone easy. Simply use your device and just tilt and touch to control the AR.Drone. Connect and See The Parrot AR.Drone generates its own Wi-Fi network to which you connect your device to control. The front camera view is streamed to your piloting device display. Autopilot The AR.Drone autopilot allows easy takeoff and landing. After takeoff, autopilot stabilizes the AR.Drone at an 80-centimeter altitude. When you remove your finger from your device, the autopilot function automatically puts the AR.Drone into stationary flight. Lost connection with the AR.Drone? Autopilot takes over again and stabilizes the device before attempting a soft and safe landing. Indoor and Outdoor Hulls Included The full hull shield protects the AR.Drone from impacts that occur during wild battles against enemies hidden in the rooms of the house. The streamlined colored hull is aerodynamic, allowing greater control outside. High Durability and Easy Repair AR.Drone is a quadricopter made of carbon fiber and high-resistance PA66 plastic. All parts can be changed for easy repair. Free Piloting App Please download the free AR.Freeflight App (iTunes App Store or Android Market) to control the AR.Drone. Augmented Reality Games Not only see what the AR.Drone sees with the front-mounted camera, but enjoy a wide variety of games in augmented reality. AR.Games sold in the iTunes App Store and Android Market. Choose from a selection of single-player and multiplayer games, using the AR.Drone's camera and the augmented reality applications. Shoot enemies or other drones. Thanks to its on-board Wi-Fi system, you can control the Parrot AR.Drone using an iPod Touch, iPhone, iPad, or Android device. The full hull shield protects the AR.Drone from impacts. The Parrot AR.Drone has been designed for both inside and outside use. AR.Drone Details Compatibility Apple iOS devices: iPod touch, iPhone, and iPad Android OS devices: Optimized for: Samsung Galaxy S, Samsung Galaxy S II, Motorola Xoom, HTC Desire; Also compatible with: HTC Desire HD, HTC Sensation, LG Optimus 2x, and Sony Ericsson Xperia Play Battery Fly time: 12 minutes 3-cell lithium polymer battery Capacity: 1000 mAh Charge time: 90 minutes Motors 4 x 15 W electric brushless motors (3,500 rpm) Construction High-efficiency propellers Carbon tube structure Front camera VGA (640 x 480) CMOS camera 93-degree wide-angle lens 15 fps video Vertical camera QCIF (176 x 144) High-speed camera (CMOS) 64-degree diagonal lens 60 fps video Horizontal stabilization Altimeter Ultrasound-based Range: 6 m Emission frequency: 40 kHz Vertical stabilization Internal guidance system MEMS (micro electro mechanical system) 3-axis accelerometer 2-axis gyroscope 1-axis yaw precision gyroscope Embedded computer ARM9 RISC 32-bit 468 MHz 128 MB DDR RAM Wi-Fi b/g Linux OS USB socket Dimensions Size: 28 x 28 inches with hull; 29 x 11 inches without Weight: 13.4 ounces What's in the Box AR.Drone, indoor hull, outdoor hull (orange/green), battery, charger, four adapters (EU, US/JP, UK, Aus/NZ), sticker for outdoor hull (for multiplayer battles), and quick start guide.

KAPPA60.9CS6-1/2" two-way component system with outboard crossover and I-mount tweeter mounting kit including Startfish OEM adapter.?  Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. ?  Edge-driven UHF dome tweeter - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer. This brand new Infinity tweeter delivers flawless output to 35kHz, ensuring reproduction of every last detail ?  Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark. ?  True Four Ohms- All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance "seen" by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit. ?  Computer-optimized voice-matched outboard passive crossovers - Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance with incredible detail and accur

The Pioneer TS-SW3001S4 12 In. Shallow Mount Subwoofer with 1500 Watts Power is designed to provide wider installation options for a broad range of vehicles. These shallow-mount subwoofers feature multiple patent-pending features to deliver the big bass performance of a full-size subwoofer, but in a compact design that can be installed either behind or under seats depending on the type of vehicle. The mounting depth is just 3-1/4 in. - less than half a typical subwoofer in this class. 1500 watts max. music power|400 watts nominal power handling|93 db sensitivity; 4 ohm rating|20 - 230Hz frequency response|Air suspension control system|Woofer: interlaced basalt/carbon fiber reinforced IMPP cone|3-layer fiber-woven radial surround with M-shape cross section|Aluminum 6 layer, long voice coil; Aluminum voice coil wire|Phenol resin coated glass cloth voice coil bobbin|Strontium magnet construction

~This 12-inch shallow subwoofer handles 1500 watts max., 400 watts nominal power, and delivers deep bass with top-notch sound quality thanks to features like Pioneer's extremely strong and lightweight Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone. Pioneer's Shallow Series Subs Lean and Mean The Pioneer Shallow Series subwoofer derives its big bass sound from its innovative design. Although only 3-1/4 inches thick, the Shallow Series uses state-of-the-art, patented air suspension technology to create a tight spring of pressure that delivers a wide-ranging bass response. The result is a radically thin subwoofer that fits a variety of enclosures and gives your system accurate, powerful, and satisfying bass. "ib-FLAT" Known as the "flat" subwoofer, the ib-FLAT name is derived from the speaker's two most outstanding characteristics. The "i" stands for intelligent design and describes the cutting-edge air-suspension technology that gives the speaker its remarkable size and strength. "b FLAT" refers to its ability to accurately and easily play 29.135 Hertz, the sound of the lowest black key on the piano and one of the most difficult to reproduce. Musical and robust, the ib-FLAT boasts an amazing range, enabling you to hear each performance on a grand scale. Install Anywhere The sleek design and compact size of Pioneer Shallow Series subs enables you to perform great custom installations. The Shallow Series plays perfectly in both tight and hidden spaces, providing you with the same booming bass performance of a regular subwoofer. Whether hidden or seen, the big bass sound of these versatile speakers will definitely get you noticed. TS-SW3001S4 Features Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone To ensure that you get more natural bass, we've incorporated out new Basalt fiber technology into our shallow subwoofers. The volcanic-rock fibers create a cone that is lightweight, rigid, well damped, stable in temperature extremes, and more . In short, this bass really rocks. 3-Layer Radial Surround A sub's surround plays a key role in its overall performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers of urethane, with a layer of interwoven fiber between them. It's strong, stable, and it reduces distortion. Spring-Compression Binding Posts Why does Pioneer use Spring-Compression Binding Posts, instead of standard speaker wire terminals? So your speaker wire NEVER shakes loose due to vibration (either from the road or from your music). When you insert the wire, the connector keeps a constant pressure on it. And it won't let go. These binding posts will accept wire as large as 8-gauge. Add Newly Designed Spoke Grilles Protect your subwoofer with the UD-G308 grille. This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism. This 12-inch shallow subwoofer handles 1500 watts. Click to enlarge. TS-SW3001S4 Specs Size: 12-Inch Woofer Cone Material: Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone Surround: 3-Layer Fiber Woven Radial Surround with M-shape Cross-section Voice Coil: Aluminum 6 Layer, Long Voice Coils Voice Coil Wire: Aluminum Voice Coil Bobbin: Phenol Resin Coated Glass Cloth Magnet Construction: Strontium Basket Design: Cast Aluminum Basket with Fin-Shaped Design Gasket: Rubber Wire Terminals: Silver Spring Compression Terminal Watts MAX. Music Power: 1500 Watts Watts Nominal Power Handling: 400 Watts Frequency Response: 20 ~~ 230Hz Sensitivity: 93dB Ohm Rating: 4 ohm Recommended Enclosure: 0.5 ~~ 1.0 Cubic Feet Dimensions: 13" x 3-7/8" Mounting Depth: 3-1/4" Accessory Grill: UD-G308 Pioneer Car Audio SystemsPioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors. What's in the Box Pioneer TS-SW3001S4 Subwoofer, Mounting Screws/Washers, Installation Guide~

The Pioneer TS-MR2040 8 In. Marine-Use 2-Way Speakers with 200 Watts Power are built specifically for marine use, with heavy-duty construction that strenuously resists water, corrosion, heat and boring music. They features Pioneer's extremely strong yet lightweight IMPP cone woofer, for improved sensitivity and reduced distortion, plus a 0.75 inch Poly Imide Reflex Horn tweeter that improves high frequencies. A Conex Damper delivers higher power handling and deeper bass, and the tinsel lead wire and terminals are gold-plated for extra protection. This is marine audio at its best. 40 watts nominal power, 200 watts max. power|Water-resistant IMPP composite cone woofer|¾ in. Poly-Imide Reflex Horn tweeter|Acrylonitrile-Elastomer Styrene (AES) glass fiber reinforced basket/magnet cover|Gold tinsel wire and gold plated wire terminals|Protected and sealed magnet circuitry|Frequency response: 25Hz - 30kHz|Sensitivity: 92 dB|40 ohm rating

This eight-inch, two-way speaker is built specifically for marine use, with heavy-duty construction that strenuously resists water, corrosion, heat--and boring music. Pioneer research showed that more bass is required for boating applications, and this one delivers. Pioneer Nautica Speakers Designed from the ground up to meet current boating/marine requirements, Pioneer's new marine speakers incorporate superior components and design to improve sound and resist the wear and tear associated with harsh, wet environments. Water-resistant injection molded polypropylene (IMPP) composite cones, elastomer surrounds, acrylonitrile-elastomer styrene (AES) glass fiber reinforced basket/magnet covers and gold tinsel wire are all incorporated in the new Nautica speakers to endure rusting, corrosion and warping. TS-MR2040 Features Water-resistant IMPP Composite Cone Pioneer's popular injection molded polypylene (IMPP) cones produce outstanding mid-bass response and resist the effects of salt water, humidity and extreme heat. 3/4-Inch Poly-Imide Reflex Horn Tweeter The Reflex Horn design is a Pioneer innovation that delivers stunning high frequencies while at the same time providing protection for the tweeter from moisture. Elastomer Surround Each speaker utilizes an elastomer surround that resists color fading or running, which extends the longevity of the product. Acrylonitrile-Elastomer Styrene (AES) Glass Fiber Reinforced Basket/Magnet Cover The AES cover protects the magnetic circuit that can affect the performance of the speaker. The speakers also sport the pure white AES grilles to resist fading and yellowing caused by direct sunlight and heat. Gold Tinsel Wire Gold tinsel wire and gold plated wire terminals are used for better current transfer. An eight-inch, two-way marine speaker with 200 watts power handling. Click to enlarge. TS-MR2040 Specs Woofer Cone Material: Water-Resistant White IMPP Composite Tweeter: 3/4" PI (Poly Imide) Reflex Horn Magnet Circuitry: Protected and Sealed Lead Wire and Connection Terminals: Gold -Plated Corrosion-Resistant Parts: Yes Water-Resistant Urethane Gasket: Yes Watts Maximum Power Handling: 200 watts Watts Nominal Power Handling: 40 watts Frequency Response: 25Hz-30kHz Sensitivity: 92dB Ohm Rating: 4 Pioneer Car Audio SystemsPioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors. What's in the Box Pioneer TS-MR2040 Speakers (Pair), Mounting Hardware, Installation Guide

Pioneer's TS-D6902R 6 In. x 9 In. 2-Way Speakers with 360 Watts Max. Power has a dual-layer IMX (Injection Molded Matrix) Aramid/Basalt fiber composite cone. These speakers feature an exclusive rear chamber tweeter enclosure that extends mid-range frequency for improved vocal imaging and staging. The built-in -12dB/Octave HPF and LPF crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection. PIONEERING AN IDEALAbsolute fidelity to musical sources takes form from speakers that reproduce the ambience in which sounds originate. Stage size, musicians' movement, aural reflection and other distinctive details all bring these sounds to life. Pioneer D-Series speakers are available in 2-way component packages or 2-way coaxial designs in multiple sizes that fit most vehicles.WHAT IS "OPEN & SMOOTH?"The "Open & Smooth" sound concept of our industry-leading speakers delivers both sonic excellence and performance. The open-staging and smooth transition of driver response makes for an immersive experience that is truly the ultimate in-car sound.Open: Open staging and sound characteristics enhance the widening effect that extends way beyond the space between speakers.Smooth: With smooth transitions between mid-bass and tweeter, sound from these speakers is not marred by crossover frequency dips.DUAL-LAYER IMX AR

These 6-by-9-inch, two-way speakers from Pioneer deliver 360 Watts of maximum power (80 Watts nominal). They feature rock-solid woofers, literally--basalt fiber (interwoven with aramid) is extremely rigid and lightweight, for serious sound integrity. Pioneer's rear chamber tweeter enclosures boast an extended mid-range frequency, which means improved vocal imaging. And the built-in crossover ensures a smooth response from both. The Pioneer D-Series D-Series speakers transform an ordinary in-car listening experience into an extraordinary one. Crafted to cater to those with an ear for exceptional audio, the D-series brings you the latest technological advances in sound engineering, including the world's first cone comprised of Basalt volcanic rock fibers. Powerful, solidly constructed, and easy to install, D-Series speakers accurately capture the magic of an artist's live performance. TS-D6902R Features Dual-Layer IMX (Injection Molded Matrix) Aramid/Basalt Fiber Composite Cone To create new D-Series speakers, Pioneer developed the industry's first basalt fiber made from natural rock interwoven with aramid fiber. Used in the surface layer, this Aramid/Basalt Fiber material is highly rigid and better absorbent, enhancing stability and maintaining integrity throughout a wide temperature range. Rear Chamber Tweeter Enclosure D-Series speakers feature an exclusive rear chamber tweeter enclosure that we first used in our famed PRS speakers. It extends mid-range frequency for improved vocal imaging and staging. High-Quality Crossover The built-in -12dB/Octave HPF and LPF crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection. Smooth Off-Axis Response The V-shaped tweeter diaphragm and arching wave guides control sound dispersion to make the sound stage wider in your vehicle, and ensure passengers and driver alike enjoy the same great sound. Two-way speakers with 360 watts power handling. Click to enlarge or view dimensions diagram. TS-D6902R Specs Woofer Cone Material: Dual-Layer IMX Aramid/Basalt Fiber Composite Cone Surround: Butyl Rubber for Smoother Response Voice Coil Bobbin: Glass-Imide Voice Coil Wire: OFC Copper Damper: Aramid Fiber Tweeter: 1-1/8" Soft Dome with Magnetic Fluid and Neodymium Magnet Rear Chamber Tweeter Design: Rear Chamber Design for Lower Crossover Frequency Basket Design: Full Depth Basket for Rich Bass Response Wave Guides: Wave Guides For Dispersion Control Built-in Passive Crossover: -6dB/Oct. LPF, -12dB/Oct. HPF Speaker Grille: Included Watts MAX. Music Power: 360 Watts Watts Nominal Power Handling: 35 watts Frequency Response: 35 Hz to 33 kHz Sensitivity (1W/1m): 90 dB Ohm Rating: 4 Mounting Depth: 3-1/2" (89mm) Cut-out Dimensions: 8-5/8" x 6" (220 mm x 151 mm) Pioneer Car Audio SystemsPioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors. What's in the Box Pioneer TS-D6902R Two-Way Speaker (Pair), Mounting Hardware, Installation Guide