Thanks for visiting our site!
Dual Bend Short
Checkout Ebay Auctions For The Cheapest Prices
 |
 Blox Racing Dual Bend Short Shifter 88-00 Civic 90-01 Integra EF EG EK DA DC  US $80.00
|
 BLACKWORKS DUAL BEND SHORT SHIFTER 90-93 94-01 INTEGRA US $77.00
|
| Powered by phpBay Pro |
Check out Amazon:
| Account limit of 2000 requests per hour exceeded. |
Here are some more information for Dual Bend Short:
There are many things to take into consideration when you are in the market for curtain rods. Curtain rods come in many different varieties, based on the building material (generally wood or metal), the size, and the type of finial that you put on the end. The rod needs to support the weight of the curtain. It also needs to fit in the decor of the room. Your curtain rods need to fit in with your home, and a wrong decision here will stick out and make you want to replace them. You will be seeing your curtain rods every time you are in the room for quite a number of years, so it is very important to take the time to get the right ones for your needs.
When deciding on a new curtain rod, it is important to know the measurement of the outside of your window frame. Most of the time, the drapes will be larger than the window frame by at least 6 inches. Going large can make the window actually look larger, but there is limits that that will work for. It is a good idea to allow room for finials that will go on the end of your curtain rod, especially if the window is near an adjoining wall.
Light curtain rods are most often built from a fairly light gauge metal. They usually are good for sheers or light curtains only. Make sure that you double check how much weight they can support prior to installation. These types are often adjustable by having two different diameter tubes that can slide in each other. This gives them a range of sizes that they are good for. The longer they go, the weaker they are, so make sure you don't exceed the recommended length. The short rods need brackets on each end. Another bracket is required in the middle for longer curtain rods.
If the curtain pole is intended for a bit heavier of a drape, it is important to get a medium sized pole that can support the additional weight. These often come in lengths that are adjustable, but only in metal. The other option that is commonly available in stock is a longer rod that is cut down to the size that you need. Of course, you can always custom order in a curtain rod that is manufactured to be perfect for the size you need. This is the most expensive option, and also takes the longest to get in. It is important to know before purchasing what weight your drapes are, and how much the curtain pole is able to hold. Sometimes you will need to add an extra bracket in the middle of the pole. In some situations you may have to go to a larger rod to get the weight carrying capacity needed.
If you are putting blackout drapes in over your window, a curtain rod that can handle the weight of them is necessary. You will most likely need to custom order heavy duty rods in, as there is not enough demand for most retailers to carry them in stock. It is important to give the actual weights of your curtains, so the rod can be built properly. When installing, make sure that you follow the manufacturer's instructions. This type of rod is often built out of wood or metal.
Rather than treating a bay window like separate panels, there are options to treat them as a single window. For sheers and light weight curtains, there are off the shelf bay window poles. These poles have slots cut in them so you can bend them during installation to make the proper curve in the right spot. Knuckle joints are available to join poles in the angles. Both of these options can sag, especially if the curtain is too heavy, or pulled on improperly when closing and opening. I recommend the use of pull through curtain rings and mounting hardware. These allow you to support the curtain rods in the appropriate areas so they keep looking good for many years.
Dan is always looking for new subjects that fit into his life to write about.
Flow Meters - Understanding Helical Rotor Performance
There are many reasons for selecting helical rotors over that of flat-bladed rotors. The helical blade transfers energy more efficiently from the flow stream to the rotor, producing a faster speed of response to flow changes (2-3 mS depending on the rotor mass and blade area).
Helical rotors also minimize rotor slip in flow startup or stop, representing more accurately the actual flow rate being measured. This is important if you have a fluid measurement requirement that is cyclic or involves short flow bursts, such as in hydraulic applications. Helical rotors have less fluid force on the bearing, which reduces friction and heat, extending the life of the bearing.
When using flat-bladed rotors, it is often a common practice to bend the tip of the support to "trim" the flowmeter. Trimming is a term meaning that the flow is directed to the rotor blade at an angle to achieve improved linearity in one direction. In addition, this will increase flow resistance and pressure drop across the flowmeter. The bent support will also want to rotate if not properly clamped.
Helical rotors do not require bending the supports to enhance the linearity.
Dual-rotor Turbine Concept:
- Unconditioned flow enters flowmeter.
- Straightening vanes smooth the flow as it enters the first rotor.
- Flow transfers momentum to the first rotor, making it spin counterclockwise. Flow then exits rotor, with a clockwise spin.
- Flow enters second rotor with a nearly perpendicular angle of attack, thereby transferring additional momentum to the second rotor. This additional momentum, results in greatly extended turndown.
- Flow exits flowmeter.
- Dual pickoffs transmit the rotor frequency signal to remote instrumentation.
Dual-rotor Performance Advantages:
- Wider flow ranges – up to 500:1
- No flow straighteners required
- High shock design
- Enhanced repeatability and overall accuracy
About the Author
Exact Flow, based in Scottsdale, Arizona USA, is the only supplier of innovative dual-rotor turbine flowmeter technology, delivering unique designs to meet the application requirements of the aerospace, industrial, automotive and OEM markets. Exact Flow's primary focus is to enhance customer value by specializing in advanced embedded electronics, multiple process variable measurements and unique packaging, which minimizes the need for additional sensors and installation expense.
? about Short shifters?
whats the difference between a straight short shifter and a dual bend short shifter???
position in which the shift knob will be. straight means the knob will be straight out. dual bend is the knob will be at an angle. its really about comfort
Robert Peston
Goldman: Consequences of Senate inquisition
Thanks for visiting!
