Thanks for visiting our site!
Couplers Hose Ends
Checkout Ebay Auctions For The Cheapest Prices
 |
 10mm Barbed End Hose Brass Quick Adapter for 13.5mm Coupler  US $6.18
|
 Earl's Swivel-Seal Coupler Hose End -8 AN Swivel Male Threads Straight 820188ERL US $17.95
|
| Powered by phpBay Pro |
Check out Amazon:
 |
Apollo Whisper-Mist Quiet Professional HVLP Sunless Spray Tanning System with a Pint of 8.5% DHA Solution with Medium Bronzer, 4 Solution Variety Pack (1 Pint Total), Tanning Tent and Accessories Sale Price: $1,119.96  |
|
When the clientele served demand the highest quality tanning experience in a subtle and hushed atmosphere, the Whisper-Mist® is essential equipment. Complete Whisper-Mist® Tanning Center System Includes: * Apollo Model TC3/T5020 Whisper-Mist® Professional Tanning System o Powerful U.S. 110 Volt Turbine Air Pump Unit inside the Whisper Quiet Box. Includes easy glide wheels. o 14 Foot Flexible Air Hose with Quick Connect Couplers. Air Hose includes a 4' extra flexible whip end where the gun attaches to reduce operator fatigue. o Apolllo's Model T5020 Professional True HVLP Spray Application Gun complete with an 8 oz. (250cc) cup. Also includes a Spare Parts Kit o Pack of (3) 8 oz solution cups with lids. (Perfect for keeping several levels of tanning solutions ready to spray) o Detailed Instruction Manual * 1 Pint of Ocean 8.5% DHA Sunless Tanning Solution with Medium Bronzer o Our most popular solution Ocean 8.5% DHA tanning solution works best with fair to medium complexion skin types (light skin, skin that sunburns, mild to medium tone skin, etc...) and provides a rich natural looking bronze tan * Ocean "DHA" Sunless Tanning Solution Variety Samplers Pack o 4 - 4 Ounce Bottles (1 Pint Total) of Professional Salon "DHA" Tanning Solutions (Medium & Dark Bronzer in both 8.5 & 12.5% DHA) o Use the 4 different solutions on the full range skin complexions types (fair and olive to deep bronze skin tones). * Turbo Tan Accessories Kit o 10 Set of Sticky Feet, 10 Disposable Hair Net Caps, 10 Disposable Bras and 10 disposable Panty Thongs * Professional Airbrush and Turbine Spray Tanning Tent Booth o Portable Folding tent with Nylon Carrying Bag |
 |
Apollo Whisper-Mist Quiet Professional HVLP Sunless Spray Tanning System with Ocean DHA Solution Sunless Tanning Variety Sampler Pack Sale Price: $999.90 |
|
When the clientele served demand the highest quality tanning experience in a subtle and hushed atmosphere, the Whisper-Mist® is essential equipment. Complete Whisper-Mist® Tanning Center System Includes: * Apollo Model TC3/T5020 Whisper-Mist® Professional Tanning System o Powerful U.S. 110 Volt Turbine Air Pump Unit inside the Whisper Quiet Box. Includes easy glide wheels. o 14 Foot Flexible Air Hose with Quick Connect Couplers. Air Hose includes a 4' extra flexible whip end where the gun attaches to reduce operator fatigue. o Apolllo's Model T5020 Professional True HVLP Spray Application Gun complete with an 8 oz. (250cc) cup. Also includes a Spare Parts Kit o Pack of (3) 8 oz solution cups with lids. (Perfect for keeping several levels of tanning solutions ready to spray) o Detailed Instruction Manual * Ocean "DHA" Sunless Tanning Solution Variety Samplers Pack o 4 - 4 Ounce Bottles (1 Pint Total) of Professional Salon "DHA" Tanning Solutions (Medium & Dark Bronzer in both 8.5 & 12.5% DHA) o Use the 4 different solutions on the full range skin complexions types (fair and olive to deep bronze skin tones) Whisper-Mist® Sophisticated Design, Quiet as a Whisper, Shhhhh! In the exclusive luxury salon world, silence is part of the ambiance. The Whisper-Mist® Tanning Center was designed by Apollo's engineers to provide the quietest stationary or movable Whisper Quiet work station. Compact, with sophisticated styling and engineering, it enhances the environment of both small studios and larger salons and spas. Here are the benefits of our unique Whisper quiet design: * Quiet as a whisper, the Whisper-Mist® provides a soothing atmosphere for the technician and client. o It's the quietest professional HVLP system available anywhere! o Whisper Quiet (62db at 3'), less than the human voice during normal conversation. |
|
Apollo Whisper-Mist Quiet Professional HVLP Sunless Spray Tanning System with a Pint of 12.5% DHA Solution with Dark Bronzer, 4 Solution Variety Pack (1 Pint Total), Tanning Tent and Accessories Sale Price: $1,119.96 |
|
When the clientele served demand the highest quality tanning experience in a subtle and hushed atmosphere, the Whisper-Mist® is essential equipment. In the exclusive luxury salon world, silence is part of the ambiance. The Whisper-Mist® Tanning Center was designed by Apollo's engineers to provide the quietest stationary or movable Whisper Quiet work station. Compact, with sophisticated styling and engineering, it enhances the environment of both small studios and larger salons and spas. Complete Whisper-Mist® Tanning Center System Includes: * Apollo Model TC3/T5020 Whisper-Mist® Professional Tanning System o Powerful U.S. 110 Volt Turbine Air Pump Unit inside the Whisper Quiet Box. Includes easy glide wheels. o 14 Foot Flexible Air Hose with Quick Connect Couplers. Air Hose includes a 4' extra flexible whip end where the gun attaches to reduce operator fatigue. o Apolllo's Model T5020 Professional True HVLP Spray Application Gun complete with an 8 oz. (250cc) cup. Also includes a Spare Parts Kit o Pack of (3) 8 oz solution cups with lids. (Perfect for keeping several levels of tanning solutions ready to spray) o Detailed Instruction Manual * 1 Pint of Ocean 12.5% DHA Sunless Tanning Solution with Dark Bronzer o Ocean 12.5% DHA tanning solution works best with medium to dark complexion skin types (olive, caribbean, latin, mediterranean, etc...) and provides a rich natural looking bronze tan * Ocean "DHA" Sunless Tanning Solution Variety Samplers Pack o 4 - 4 Ounce Bottles (1 Pint Total) of Professional Salon "DHA" Tanning Solutions (Medium & Dark Bronzer in both 8.5 & 12.5% DHA) o Use the 4 different solutions on the full range skin complexions types (fair and olive to deep bronze skin tones). * Turbo Tan Accessories Kit o 10 Set of Sticky Feet, 10 Disposable Hair Net Caps, 10 Disposable Bras and 10 disposable Panty Thongs |
 |
Lincoln Lubrication 1134 Heavy Duty Pistol Grip Grease Gun with Whip Hose and Rigid Pipe List Price: $49.75 Sale Price: $30.59 |
|
This Lincoln Pistol Grip Grease Gun features a rugged cast head and jam-proof handle. 3-way loading. Includes whip hose and 4in. rigid tube with coupler. Operating PSI: 7,500, Capacity: 16-oz. bulk or 14 1/2-oz. Cartridge capacity, Cordless: Yes, Application: Pistol grip manual grease gun, Hose Length (in.): 18, Grease Fittings: 4 in. rigid tube w/coupler, Case Included: No, Includes: 3-way loading |
 |
Lincoln Lubrication 5883 Slotted Right Angle 90 Degree Coupler List Price: $8.50 Sale Price: $5.66 |
|
Reach and grease those tight grease fittings with this 90 degree coupler. Add it to most any grease gun. |
 |
Lincoln Lubrication 5803 Grease Needle Nozzle List Price: $11.60 Sale Price: $6.39 |
|
Manufacturer:Lincoln Lubrication5803Grease Accessories Allows operator to contact flush type or hard-to-reach hydraulic typefittings. |
 |
Tru-Flate® Couplers T Style 13-604 Sale Price: $5.60 |
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. |
 |
Nelson Brass Quick Connector, Male 2-Piece List Price: $14.55 |
|
Nelson Brass Quick Connector, Male 2-Piece |
 |
Quick Fix Garden Hose Repair Coupling - Male and Female Ends - Fits all plastic and rubber garden hoses from 7/16 inches to 3/4 inches - No tools necessary List Price: $5.99 |
|
Quick Fix Garden Hose Repair Coupling - Male and Female Ends - Fits all plastic and rubber garden hoses from 7/16 inches to 3/4 inches - No tools necessary |
 |
Nelson 50336 Brass Hose Quick Connectors Set, Male and Female List Price: $15.99 Sale Price: $5.74 |
|
50336 Features: -Quick connector male female set.-All brass body.-Fits standard hoses, outdoor faucets and watering products. Includes: -Set includes one female and one male. |
Here are some more information for Couplers Hose Ends:
How to Fit a New Stainless Steel Kitchen Sink
Preparation
- Isolate the water supply.
- If you are replacing an existing sink, drain the hot and cold pipes by turning on both taps. Label the water supply pipes so you know hot from cold.
- To replace an old sink into an existing unit ensure the sink is the correct size for the hole in the top of the unit.
Cutting a recess hole in the worktop
If you are fitting a sink into a new worktop you will need to cut a recess hole.
- Place the sink face down on the worktop ensuring there is even space at the front and the back of the sink. Mark the position of the sink with a pencil.
- Taking the measurement of the lip of the sink, draw another line inside the first.
- Using a power drill fitted with an auger bit drill a hole in each corner inside the inner line.
- Starting from one of the holes use a jigsaw to cut along the inner line.
- Having created the recess hole check that the sink fits into it. If satisfied with the fit treat the cut edges of the worktop with a wood preservative.
Connecting up the supply pipes
- Whether you are just replacing an old sink or the whole unit, the first thing to do is turn the sink upside down and look for a slot marked E in the rim.
- Fit the green-and-yellow earthing wire into this slot to prevent the risk of electric shocks should the appliance come in contact with any electrical currents. If the sink is stainless steel you will need to attach this wire to the earthing cable, which runs between the metal fittings of your appliances.
- Follow the sink manufacturer's instructions to fit the sink securing clips to the worktop.
- To fit the taps, place the taps over the prefabricated holes in the back of the sink (or single hole, if you have a monoblock tap). If the supply pipes are too high to connect to the tails you will need to cut them to size with a pipe cutter, or failing this, a hacksaw. If the tail pipes are plastic, a plastic connector between the tap tails and the supply pipes will be required.
- Feed the tap hoses or flexible connectors from the hot and cold supply pipes through the hole from underneath and attach them to the correct tap tails.
- Secure the taps in position under the unit with the nuts and washers provided, sealing the join between taps and sink with silicone mastic or a rubber gasket.
- The sink can then be secured into the worktop by tightening the clips in sequence, ensuring there is a waterproof adhesive seal where the sink meets the top of the worktop.
Fitting a monobloc tap
- If a monobloc tap is to be fitted then you will need reducing joints or couplers, to connect the 10mm (2/5in) pipe of the monobloc to the 15mm (3/5in) supply pipe.
- Attach a shut-off valve, sometimes called a service valve, to each supply pipe and turn it to the off position.
- Attach a 15mm (3/5in) piece of copper pipe to the top of the service valve. Screw the 10mm (2/5in) end of the reducing joint onto to the tap tails and then slot the 15mm (3/5in) end onto the copper pipe, bending the tap tails gently if they are slightly out of alignment with the supply pipes.
- Tighten both ends with a wrench and turn on each service valve.
- The sink can then be secured into the worktop by tightening the clips in sequence, ensuring there is a waterproof adhesive seal where the sink meets the top of the worktop.
Connecting the waste pipe
To connect the waste pipe you will need a drain kit containing a tubular trap, often called a P-trap or S-trap because of their shapes, which stops unpleasant smells coming up from the drains
- Connect the vertical outlet to the underside of the sink's waste outlet by simply screwing it in place. At the same time connect the overflow pipe to the overflow outlet on the sink.
- Fit the P-trap or S-trap to the vertical outlet from the sink and then connect the horizontal branch pipe to its other end. Check that all the joints fit tightly together.
Turn on the water supply and if there are any leaks, tighten the fittings. When you check for leaks, make sure the water has had time to build up to optimum pressure. Continue to check the connections regularly for a couple of days to ensure no slow leaks have developed.
About the Author
John Burry is the editor of www.lets-do-diy.com He has extensive experience writing for a broad spectrum of UK publications covering industries as diverse as health, automotive, beauty, new media and construction. Before taking up his current position he worked in PR where he was account manager for a number of blue chip clients. John has gained a reputation for detailed research and presenting information clearly and concisely.
Why won't the split nut's on my spa hot tub quit leaking?!?! Should I use a rubber coupler w/hose clamps?
I've replaced the split nuts, I've replaced the gaskets (should I be using O-rings instead?), I've replaced the female end (yes the threads match), I've wrapped the threads with teflon tape 3 times, to no avail!!! I even tried putting teflon tape between the split nuts before screwing them together. What am I doing wrong?! If over tighten the split nuts, they crack and break! (happened twice)
Should I use one of those big, thick, heavy duty rubber couplers w/hose clamps? If so, what do I do about the lip on the heater tube? Try to slip the coupler over it (yeah right)? Or grind it off maybe? Will my heater tube get too hot and melt the rubber coupler?
Hi, A common problem we see 4-5 times a day. Get Balboa heater gaskets. They are white and are two sided. A square side to fit into your pvc pipe and a ridged side to fit inside the stainless steel heater assembly. They are the best on the market. Should only cost a couple of bucks. DO NOT overtighten. NO sealents, nor lubes. Almost wondering if your pvc is flush or warped from heat over time. (does happen) to keep you from getting a good tight seal. The heater will melt the rubber in time. I have seen people do it (gulp!). Feel free to email us anytime.
Thanks for visiting!
