Thanks for visiting our site!
Air Inlet System
Checkout Ebay Auctions For The Cheapest Prices
 |
 PT-CRUISER 2.4L TURBO UPPER ALUMINUM INTERCOOLER PIPE S  US $178.99
|
 PT-CRUISER 2.4L TURBO UPPER ALUMINUM INTERCOOLER PIPE US $178.99
|
| Powered by phpBay Pro |
Check out Amazon:
 |
March High Temperature Pump for Brewing Home Brew Sale Price: $133.55  |
|
This is the ideal brewing pump built by March Manufacturing. This pump is constructed of food-grade material, handles wort at boiling temperature, and takes back pressure (flow restriction). The pump housing is made from polysulfone because it is a tough, food-grade plastic rated to temperatures as hot as 250F, well above boiling wort temperatures. It offers many of the benefits of the ideal material, stainless steel, without the prohibitive cost. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump under the level of the liquid source. The pump is brewer friendly and includes a bracket so that it can be mounted and a 6' power cord with plug wired in for easy use. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 gpm with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 gpm and with an 8' head it will pump 2.5 gpm. 1/2" mpt fittings on the outlet and 3/4" mpt inlet. Materials in contact with solution are Polysulfone, 316 stainless steel, silicon rubber, Raton and Teflon. Shaded pole, thermal overload protected, single phase motor is fan cooled. Will handle internal pressures to 150 psi. Max pressure the pump can produce in a closed system is a little over 5 psi. Face unscrews and rotates at 90 degree intervals to adjust to your application. To restrict flow place a ball valve on the out flow of this pump. The center inlet port allows for easy draining and cleaning of the pump. Side inlets cost slightly less, but will allow wort and water to sit in the bottom of the pump and mold overtime. The center inlet makes it easy to clean and use. This is why you see the center inlet port pumps in use at all professional breweries. |
 |
Zoeller 105-0001 Laundry Pump Package Including M53 Sump Pump List Price: $285.00 Sale Price: $202.49 |
|
Removes water from areas where gravity flow is not available. Easy installation--no need to dig a sump. Applications include laundry tray pump, sinks, lavatories, air conditioning condensate, dehumidifier water removal, residential dishwashers and garbage disposals. NO INLET FILTERS OR SCREENS TO CLEAN! |
 |
The Dust Deputy DIY Sale Price: $51.50 |
|
ON SALE! For a limited time, the Dust Deputy DIY is $20.00 off! Prior sales excluded. The Dust Deputy is an extremely efficient, cyclonic pre-separator for vacuums. Trap dust in the barrel and NOT in your shop vacuum. The Dust Deputy will filter 99% of sanding dust, with only 1% going into the vacuum. Extend the life of your shop vacuum and your filters! The Dust Deputy is injection molded from translucent, static dissipating plastic. Added to your existing shop vacuum, it uses centrifugal force to literally spin the material being conveyed right out of the airstream, and into the bucket. 99% of the material NEVER reaches your shop vacuum! The DIY kit includes the cyclone ONLY. Flat rate shipping to the Lower 48 United States only $12.50. Alaska, Hawaii, Canada, and all other countries, please call 800-732-4065 for shipping arrangements. |
 |
Camco 36153 RV Brass Blow Out Plug List Price: $5.99 Sale Price: $4.42 |
|
Camco Blow Out Kit. Helps you clear your water lines completely. Simply screw plugs into the city water inlet, open all drains and faucets, attach and activate air pump until all lines are clear of water. Order Now! Camco Blow Out Kit |
 |
Outback VFX 3524 Inverter Sale Price: $1,727.97 |
|
Vented 120 VAC/60 Hz (DC Cover Included) 3500 Watt 24 Volt DC, 85 Amp Charger, 60 Amp AC input |
 |
Enermax Technology 1250w Sgalaxy Evo82+ Modular Power Supply With Ultra-Quiet 13.5cm Fan List Price: $709.41 Sale Price: $369.59 |
|
SERVER ready- SSI PSDG 2009 support for latest Intel Core Extreme/i7, Xeon and AMD Opteron and SLI or CrossFireX and AMD GAME! or AMD GAME! Ultra systems and downward compatible with SSI PSDG 2008 1.0, EPS12V 2.92, 2.91, 2.8. DXX ready- For PCI Express |
 |
Startechcom Heavy Duty Pc Add-In Case Computer Fan/Video Ca Exhaust Fan Inlet Brushless Dc Motor List Price: $50.73 Sale Price: $22.59 |
|
The exhaust fan inlet faces adjacent PCI or AGP cards and makes a great video card cooler for hot running 3D accelerator cards like the Voodoo, TNT2, GeForce256 and others. A quiet running brushless DC motor coupled with a high efficiency blade design is capable of moving 42 CFM (cubic feet per minute) of air. Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug. Notice: Customers should thoroughly inspect all cartons for damage before signing for the shipment. Damage: Must be reported within 15 days from delivery date. Shortage/Fallout: Must be reported within 15 days from delivery date. Loss: Must be reported within 30 days from ship-date. If you have any other questions about the product, please contact us any time. |
 |
Camco 36143 RV Blow Out Plug with Brass Quick Connect List Price: $7.34 Sale Price: $6.95 |
|
Camco's RV Blow Out Plug with Brass Quick Connect leaves your hands free to open faucets and flush out water lines without assistance. Screw the plug into your RV's city water inlet, open all drains and faucets, then connect your air compressor quick connect hose. It aids in the removal of water from your water lines. |
 |
Air Intake Supercharger Booster Turbonator List Price: $149.99 Sale Price: $29.99 |
|
* Increase Horsepower Up To 7% more hp! * Easy to install - Takes Less Than 5 Minutes! * Fits Virtually All Makes And Models Of Cars And Trucks! * Works On Carburetor And Fuel Injected Engines! * For Gasoline And Diesel Engines! * For 4 or 6 cylinder models only! Not for V8Made entirely of aircraft grade aluminum-titanium alloy, the Surge SuperCharger is machined to perfection! The blades spin freely and smoothly its shaft being supported by a space grade zero friction ball bearing.The Surge SuperCharger has a 2.5 inch diameter for easy mounting. The product installs inside the intake hose going to the throttle body from air filter. A clamp is included to secure the Surge SuperCharger inside the intake hose. It also includes a rubber coupler that will create a vacuum seal inside the intake chamber. If your hose has a diameter greater then 2.5" you must custom fit it therefore please ask your qualified mechanic to install it.This is a universal and will fit any vehicle, SUV, pickup etc.... |
 |
Flowmaster 42541 40 Series Muffler - 2.50" Offset In / 2.50" Center Out - Aggressive Sound List Price: $100.29 Sale Price: $53.99 |
|
FLOWMASTER, 40 SERIES PERFORMANCE MUFFLER, SOLD INDIVIDUALLY, ALUMINIZED STEEL -- Original Powerful Flowmaster Sound With Noticeable Interior Resonance, 2.50" Offset Inlet And 2.50" Center OutletMaterial: Aluminum Aluminized SteelSeries: 40 Series |
Here are some more information for Air Inlet System:
Are you interested in more power for your car? If so then this article will show you a way to gain horsepower for a very reasonable expenditure. You may have heard of the term cold air intake or cold air intake but perhaps you were not sure what this really meant.
Your car engine produces power through the burning of oxygen and fuel in the combustion chambers. The ratio of the oxygen and fuel is carefully controlled by other devices in your car. One way to increase the power is to increase the amount of oxygen that the engine receives. If you can increase the oxygen in the cars system will increase the amount of fuel and you will generate more horsepower. Air contains oxygen and if you can get more air into the engine you will thereby increase the power output. Denser air will contain more oxygen and that's one of the keys to getting more horsepower with a cold air intake system.
When a manufacturer builds a car they are interested in many trade-offs. One of these is balancing the noise that is made by air entering the engine and the power that the engine will produce. By decreasing the noise they have also decreased the power. The car manufacture usually creates a restricted airflow path from the outside atmosphere into the engine.
A cold air intake system is designed with several things in mind. One of these is to put the inlet for the airflow as far away from the heat of the engine as possible. This is how a cold or cold air intake system received its name. By reducing the incoming air by 10 degrees you would receive a 1% increase in horsepower and torque. Typically a cold air intake system will have the inlet either behind the front bumper or in one of the wheel wells. Air in these locations is much cooler than the air inside the engine compartment, where a stock engine receives its air from.
The second design criteria for a cold or cool air system is to minimize the restrictions in the airflow to the engine. The tubes that conduct the air in these devices are designed with smooth interiors and gentle curves so that the airflow is not unnecessarily slowed down. Usually these systems while also contain a replacement air filter for the stock air filter that came with your car. This newer filter is also designed to minimize the restrictions of airflow in the stock filter will have.
So by increasing the density of the air and thereby the amount of oxygen it contains and minimizing the restrictions of airflow a cold air intake system will increase horsepower that you will receive. However, there is a down side. Your car will make a lot more noise than before.
Dennis Dater has been involved with cars for over 50 years. He is now in the process of opening a web site which will sell only Honda Accord aftermarket automobile parts. Please visit him. http://www.accordmania.com
New Power Tube Make-up Air System
Industrial Pressure Blower Co. designs different kinds of industrial and commercial air moving equipment. It developed a PT Power Tube Make-Up Air System - one of the most economical options for larger industrial plants ventilation air make up systems.
PT Air Make-Up fan system is a new ventilation concept. It utilizes some aerodynamic principles for supplying, tempering and distributing make-up air in a building in cold weather. It offers more efficiency, economy and comfort than most conventional make-up air units.
When exhaust fans are used to provide ventilation, both for industrial and process exhaust and personnel comfort, a negative air pressure is created within the building. This negative pressure causes several problems:
- Process exhaust systems are less efficient and may not work properly.
- Down flow can occur through gravity vents and result in the back venting of products of combustion from flues and stacks of heaters and process equipment.
- Drafts are created that are a dsicomfort to employees. Safe operating of outside doors may even be impaired.
Our Power Tube Fan Make-Up Air System solves all of these problems economically, even on the coldest winter day.
PT Fan System consists of a specially designed air supply fan, a wall housing and a motorized air inlet damper. A long polyethylene tubing is attached to the unit and extends horizontally inside building supported from wire. It has precision holes punched on both sides at specific intervals along its length and has an opposed end closed off.
Each fan housing assembly is mounted in the outside wall opening or connected to a roof air supply fan.
In the winter, conventional make-up air systems have to heat the cold outside air prior to introduction into the building. This is an expensive process in both equipment and continuing energy cost. The Power Tube Fam Make-Up Air System is a simplier system that utilizes waste building heat and basic earodynamic principles for supplying, tempering and distributing make-up air. And that makes it less expensive than conventional make-up air systems to purchase, to install and to operate.
When make-up air is needed, the motorized inlet shutter opens, the supply fan turns on and supplied fresh outside air inflating the tube for its full length. The air discharges from the punched holes in the tube located overhead as small high velocity jets which create turbulent mixing with the warmer inside air. As a result the outside air is effectively tempered before it reaches the worker level, creating a uniform draft free make up air system.
Normally several PT Fan systems are required for a building, depending on the size of the building, volume of make-up air required, size of PT Fan models selected. Additional heating, if required, may be furnished from conventional type space unit heaters positioned near the distributing PT tubes.
Industrial Pressure Blower Co. PT Air Make-Up System has the following advantages over coventional make-up air units:
* Offers savings in initial investment and operating costs;
* Provides draft-free and uniform air distribution from along tube rather than blasting air from a single source outlet;
* Uses less energy due to lower horsepower for the same supplied air volume and because of friction loss of blowing air through a heat transfer system is completely eliminated;
* Easier and less costly to install, as PT Fan system is relatively light in weight ans the polyethylene tubing can be installed in a fraction of time normally required for conventional ventilation ducts;
* Eliminates coil freeze-up problems typical for AHU with heating hot water and steam heat exchangers;
* Reclaims overhead heat wasted in most buildings - through mixing of outside air with inside hot air;
* Very quiet, normally within 20 Fan Sones;
* Flexible in capacity, which is achieved by running only the required number of PT units based on the temperature inside the building;
* Provides a more comfortable eworking environment by maintaining gentle air flow and uniform temperature distribution.
Power Tube Make-Up Air Fans are available in Sizes 18 to 48 for for air flows up to 40,000 CFM.
PT Power Tube Make-Up Air System tube is constructed of thick woven high density polyethylene fiber(8 x 
laminated with poly coating to a thickness of 6 Mils. It is 3.8 oz. per square yeard material. Burst strength is 118 Lbs per square inch. The material is flame retardant and complied with NFPA Standard 701. Tubes are available in two colors: blue and white. One end of the polyethylen tube is factory dealed.
Sufficient make-up air should be provided to balance exhaust from general ventilation and process ventilation. Usually several Power Tube Fans will be required, located to distribute air throughout the plant. If additional tempering of make-up air in specific plant areas becomes necessary, unit heaters can be added.
Additional information can be found at the Canada Blower company web site http://industrialpressureblower.com/blower.html.
Susan Terlitski
Air Systems Designer and Engineer
Industrial Pressure Blower Co.
http://industrialpressureblower.com/contact.html
http://industrialpressureblower.com/inquiry.html
About the Author
Canadian air-handling systems designer.
Mrs. Siouzanna Terlitskaia, nis-co@nis-co.com
Canadian Air Systems
http://nis-co.com
How can to find a advantage of a gas turbine inlet air fogging system instalation?
talk to the people at the company that sells them
Little movement on Anchorage ferry landing
Workers constructing the long-awaited M/V Susitna, the ferry that will eventually taxi passengers and cars across Cook Inlet, passed a milestone recently, when the boat floated on water for the...
Thanks for visiting!
